Southwest Spectro-Chem Labs

Specialized Testing

Non-Routine & Specialized Testing

Whatever you're testing, we've got the experience. If you still don't see what you're looking for, give us a call — we can either do it or refer you to someone who can.

Beyond the Standard Panel

Some applications demand tests that go beyond routine wear metal and fluid condition analysis. From analytical ferrography to refrigerant analysis and varnish formation tendency, our lab handles the full spectrum of specialized oil and fluid testing — following current ASTM methods and our own validated procedures.

SWSC

Analytical Ferrography

20 metals, direct reading (DR), and photomicrographs. Identifies wear particle morphology to pinpoint the type and severity of wear occurring in a machine.

Multiple ASTM

Coolant Analysis

Metals content, glycol percentage, freeze point, pH, conductivity, color, and appearance. Complete picture of coolant condition and contamination.

ASTM D130

Copper Strip Corrosion

Evaluates the tendency of a petroleum product to corrode copper — critical for systems with copper alloy components such as bearings and bushings.

SWSC

Deposit Analysis

20 metals, ash content, and 4 anions. Identifies the composition of deposits found in filters, sumps, or on machine surfaces.

ASTM D1401

Demulsibility

Measures the ability of an oil to separate from water. Essential for turbine oils, hydraulic fluids, and any lubricant exposed to water ingress.

SWSC

Filter Analysis

20 metals and photomicrographs from filter debris. One of the most powerful diagnostic tools for identifying the source and severity of internal machine wear.

Multiple ASTM

Fuel Analysis

Metals content, viscosity at 40°C, Karl Fischer water, flash point, and particle count. Comprehensive quality and contamination check for diesel and other fuels.

ASTM D7843

Membrane Patch Colorimetry (MPC)

Quantifies varnish-forming potential in turbine and hydraulic oils by measuring the color intensity of deposits on a membrane patch.

SWSC

Micropatch Analysis

Microscope analysis, photomicrographs, and written report. Provides a visual record of particulate contamination for root-cause investigation.

SWSC

Refrigerant Analysis

Karl Fischer water, TAN, and high boiling residue. Evaluates refrigerant quality and contamination in HVAC and refrigeration compressor systems.

ASTM D6971

RULER

Remaining Useful Life Evaluation Routine. Measures antioxidant depletion in turbine and other long-life oils to predict remaining service life.

SWSC

Varnish Formation Tendency

Assesses the propensity of an oil to form varnish deposits on critical surfaces — a leading cause of servo valve stiction and turbine trip events.

ASTM D2270

Viscosity Index

Calculates the rate of viscosity change with temperature. A low viscosity index indicates poor multi-grade performance or oil degradation.

SWSC-330

Water Analysis

ICP metals, pH, conductivity, chloride, P alkalinity, and M alkalinity. Full characterization of process or cooling water quality.

SWSC-330

Water Source Determination

Identifies the origin of water contamination in a lubricant — distinguishing between condensation, process water, coolant, or wash-down water.

Don't See What You Need?

Give us a call or send a message. We can either run the test or refer you to someone who can.

Questions about a specific test? Call us at +1.713.944.3694 — we can either run it or point you in the right direction.